How Much Does Paver Sealing Cost?
Paver sealing in Wesley Chapel is typically priced by the square foot, ranging from $1.50 to $3.50 per square foot depending on the size of the area, condition of the pavers, whether old sealer needs to be stripped, and the type of sealer used. Larger projects often have a lower per-square-foot rate. Cleaning is required before sealing and is priced separately.
What Goes Into Paver Sealing Pricing
Paver sealing is not a single flat rate because every project is different. The price depends on the preparation required, the condition of the pavers, and the sealer type. When you request a free quote, we assess all of these factors and provide an itemized price.
Pricing Factors
Square Footage
Larger areas typically have a lower per-square-foot rate. Small projects may have a minimum charge.
Cleaning Preparation
Pavers must be thoroughly cleaned before sealing. Heavy staining or algae adds cleaning time and product.
Old Sealer Stripping
If existing sealer is worn or flaking, it must be stripped before new sealer is applied. Stripping adds labor and cost.
Joint Sanding
Eroded joint sand needs to be replaced before sealing to stabilize the pavers.
Stain Treatment
Oil, rust, or organic stains may require specialized pre-treatment before sealing.
Sealer Type
Different sealer types (gloss, satin, penetrating) have different material costs and performance characteristics.
Typical Price Ranges
| Project Size | Typical Range | Notes |
|---|---|---|
| Small patio (200-400 sq ft) | $2.50 - $3.50/sq ft | Minimum charge may apply |
| Driveway (500-1,000 sq ft) | $2.00 - $3.00/sq ft | Most common residential project |
| Large driveway + pool deck (1,000+ sq ft) | $1.50 - $2.50/sq ft | Volume pricing for larger areas |
| Old sealer stripping | +$0.50 - $1.50/sq ft | Added to sealing cost |
The Paver Sealing Process
Cleaning
Pavers are pressure washed to remove all dirt, algae, oil, and organic growth. Stains are pre-treated.
Joint sand replacement
Eroded joint sand is swept in and compacted to stabilize the pavers.
Drying time
Pavers must be completely dry before sealer is applied. This may require a 24-48 hour wait depending on weather.
Sealer application
Sealer is applied evenly across the surface, typically in two coats for full coverage.
Curing
The sealer needs 24-48 hours to fully cure before foot or vehicle traffic resumes.
How to Reduce Your Paver Sealing Cost
- Bundle with driveway cleaning to avoid a separate trip charge
- Seal before the old sealer completely fails to avoid stripping costs
- Schedule larger projects together (driveway + pool deck) for volume pricing
- Keep pavers clean between sealings to reduce preparation time
See our paver sealing service for more details, and our guide on how often to seal pavers in Florida.
Have a question about your property?
Get a free, no-obligation quote for exterior cleaning across Wesley Chapel and Tampa Bay.
Serving Wesley Chapel, Land O' Lakes, Tampa & the greater Tampa Bay area.